/// Shape to be used at the corners of paths that are stroked
enumPdfLineJoin{
/// The outer edges of the strokes for the two segments shall beextended until they meet at an angle, as in a picture frame. If the segments meet at too sharp an angle (as defined by the miter limit parameter, a bevel join shall be used instead.
miter,
/// An arc of a circle with a diameter equal to the line width shall be drawn around the point where the two segments meet, connecting the outer edges of the strokes for the two segments. This pieslice-shaped figure shall be filled in, producing a rounded corner.
round,
/// The two segments shall be finished with butt caps and the resulting notch beyond the ends of the segments shall be filled with a triangle.
bevel
}
/// Specify the shape that shall be used at the ends of open subpaths
/// and dashes, when they are stroked.
enumPdfLineCap{
/// The stroke shall be squared off at the endpoint of the path. There shall be no projection beyond the end of the path.
butt,
/// A semicircular arc with a diameter equal to the line width shall be drawn around the endpoint and shall be filled in.
round,
/// The stroke shall continue beyond the endpoint of the path for a distance equal to half the line width and shall besquared off.